autoscale chart
-
- Posts: 2
- Joined: Tue Aug 28, 2018 7:44 pm
- antibot: No, of course not.
autoscale chart
Hi! I'm using the jfreechart to generate graphics of real time data's sensors. I'm using the timeseriescollection but i'm having troubles with the Y axis scale. Sometines the value of one (there are 6 sensors) sensor and when the value is near to 0 again, the scale remains at the high value. I need it to go back to a smaller scale, but i can't find any method. Anyone has an idea how can i do it? Thanks!
-
- Posts: 513
- Joined: Wed Sep 12, 2007 3:18 pm
Re: autoscale chart
Verify that your code is correctly synchronized.
-
- Posts: 2
- Joined: Tue Aug 28, 2018 7:44 pm
- antibot: No, of course not.
Re: autoscale chart
It is synchronized, the problem is that if all my sensors have values around 5-10 for example, and one goes to 1500 and goes back to 10. Then i can't see the nexts peaks in the signal, because the Y axis's scale remains around 1700. I need the axis to reescale around 20 again (like was at the beginning).
-
- Posts: 513
- Joined: Wed Sep 12, 2007 3:18 pm