Rounding values on Y axis and aligning zero.

ahmetalpbalkan · Post by **ahmetalpbalkan** » Mon Aug 02, 2010 9:14 am

Hi guys I have 2 problems.

First of all I have all values 0 on my bar chart. But bars are centered vertically on the chart. See below:

I want to align bars to the bottom if all values are zero.

SOLVED::Another problem is about rounding values on Value Axis.

For the chart above, there are just 0 and 1 values. However it has fractal values in the chart. I want only 0 and 1 to be visible. It occurs even on min:0 max:10, and shows labels such as 2.5 5.0 7.5 10.0, in this case I want just rounded integers to be visible.

Any ideas?

Thanks.

pooo · Post by **pooo** » Mon Aug 02, 2010 10:18 am

Have a look at the faq.

http://www.jfree.org/jfreechart/faq.html#FAQ7

ahmetalpbalkan · Post by **ahmetalpbalkan** » Thu Aug 05, 2010 12:14 pm

This solved the rounding problem.

What about the alignment of all zeros to the bottom?

ahmetalpbalkan · Post by **ahmetalpbalkan** » Tue Aug 10, 2010 4:42 pm

Hey guys this is a serious problem? Why can't I align bars to the bottom if all values are zero?

www.jfree.org

Rounding values on Y axis and aligning zero.

Rounding values on Y axis and aligning zero.

Re: Rounding values on Y axis and aligning zero.

Re: Rounding values on Y axis and aligning zero.

Re: Rounding values on Y axis and aligning zero.